http://www.airsoftpost.com/firefox-111v ... 29681.html

Just to start off I would like to say this battery is worth every penny.

I decided to run it in my saw just to see the rate of fire. I produced I would say about 23 bps.

It consistently runs at 12c discharge and the voltage goes up and down.

I got my voltage up to 14.1 volts which is typical for a lipo to run 2 or 3 volts higher.

This battery takes a long time to wear down and when it does MAKE SURE it does not hit less then 3 volts.

The battery fits in most places on usual guns and for a M16 that the battery goes into the hand guard I would get a 3 piece lipo.

The battery that it comes with is a Esky balancer and it comes with a car battery charger adapter.

This would NOT fit in any Ak47's that fit into the body top.

It also comes with a Mini type tamyia connector. Dean's connectors would be recommended due to the fact that they are high voltage connectors.

-Matt

You got ripped off, dont buy Li-po batteries from airsoft retailers.

Edit: That battery is probably worth $15, you can get a better quality li-po from ebay, hobby stores, etc. I got my 3000mah 11.1v 35c BLC Li-po for $25 shipped.

andi i got a 25c 7.4 1750 mah for 8 Bucks

http://www.ebairsoft.com/firefox-111v-1100mah-lipolymer-battery-short-p-2088.html

I know. I just wanted to be safe with my first airsoft order. Plus my problem is I need it to fit in my buffer tube.

no offense to the thread or anything. i've had bad experiences with my 2 firefox stick type lipolies. like out of 3 only 2 worked. of that 2 1 gets extremely hot so i only use it for testing and the other one so far hasn't died lol. i now buy my lipolies at Time Machine over in Manchester because i know the owner and his family so i get a pretty bramf discount. but the ones i use now are a Tenergy 11.1v 1200mah stick type lipoly that are 20C. they havn't failed me yet...

I haven't used my firefox enough to say yet. I have used it only about 200 shots.

WTF - they wouldn't sell me any because they were for an "air gun," my fault for bringing in the buffer tube for reference... Not only that, but the weekday guy in the R/C area wouldn't even take them down when I've asked to see them up close so I could pick one that would fit my needs even before I brought the tube in. After my third attempt, I gave up and bought off teh intarwebz.

that guy is a complete asshole. i deal with the owner lol

Yeah I know. I was looking into getting one of the revo3.3's there and he talked to another guy for 2 HOURS while multiple people stand in line. The thing he was talking about was a bbq too

I just say I have a really weird shaped RC helicopter